NBOT

Nano-Bubble Oxidation Technology

NBOT Labs has developed a chemical free, all-natural water disinfecting technology known as NBOT or “Nano-Bubble Oxidation Technology”. NBOT infuses ozone into nano-bubbles to create large volumes of hydroxyl radicals in water. Hydroxyl radicals are one of the most powerful oxidants known to science, over 100,000x stronger than chlorine, and can oxidize or virtually “wipe out” any organic compound in the water column.

Features And Benefits

Nano-bubbles are microscopic and do not rise to the surface, which results in a safe and highly efficient delivery of hydroxyl radicals into the water (>95% gas absorption rate).
Nano-bubbles produce heat and energy when they “burst” or implode in the water, which combines with the ozone as a catalyst to generate large volumes of hydroxyl radicals.
Nano-bubbles stay in the water column for an extended time period resulting in a much longer disinfecting cycle, which is critical as new bacteria and toxic by-products are produced when algae is destroyed
Nano-bubbles diffuse throughout the entire water column, so disinfecting occurs at all depths, not just near the surface.

Product Name:	NBOT 7.5HP-30
Dimensions	Length: 41 Inches \| Width: 25 Inches \| Height: 50 Inches
Flow Rate	230 LPM 60 GPM
Treatment Volume	1,840 LPM (480 GPM) of water
Ozone Level	30 g/hr at a NWP of 20 PSIG at a Max. Concentration (% by weight O3) of 16%
Oxygen Level	10 LPM (2–9 LPM up to 95% purity and 10 LPM up to 93% purity)
Working Temperature Range	41 degrees F to 98 degrees F
Maximum Elevation	10,000 feet above sea level.
Power Requirements	220 Volt Single Phase
Input Pipe	2″ diameter, Length varies 20 feet normal
Output Pipe	1.5″ then breaks down to two 1.25″ pipes. Length varies, 25 feet normal
Pipe Length	75 feet
Maximium Elevation	8 feet in height if no additional pump

NBOT

Features And Benefits

Interested in NBOT Solutions?